Protective glasses for smart watchesApple Watch curved (three-dimensional) 1, 2, 3, 4, 5 and 6 series with screen sizes 38, 40, 42 and 44 mm.
The glass has an adhesive surface only at the edges, which eliminates the appearance of irritating air bubbles on the screen and allows you to stick it even without experience.
Glass with an adhesive surface over the entire area adheres better to the watch screen, but is more difficult to install, since it is necessary to squeeze out the air and not leave bubbles, which will later be noticeable and cause irritation, and from the outside look sloppy on an expensive watch, in form of a defect.
Material - tempered glass. Glass does not reduce the sensitivity of the screen and does not distort the image. In addition, if there are already micro scratches on the smart watch screen, the glass can partially hide them.
The cost of glass with a self-adhesive surface around the edges is 3 EUR.
The cost of glass with a self-adhesive surface over the entire glass area is 5 EUR.
The cost of glass with a self-adhesive surface over the entire glass area and without black edging (only for 44 mm) is 8 EUR.
Why do you need protective glass for a smart watch?
Despite the fact that every smartwatch manufacturer claims that both the case and glass are resistant to wear, nothing lasts forever. We carry our smartphones in various protective cases, glue protective films and glass onto the screen, and a smart watch, in its essence, is nothing more than a mini smartphone. Therefore, not only glasses, but also protective covers for them have already appeared on the market. When wearing a smartwatch, they are constantly in contact with clothing, which may have various buttons, buttons, zippers, and so on. Sooner or later, micro scratches begin to appear on the watch screen, which causes the appearance to suffer and subsequently the price on the secondary market to drop. In addition, while on your hand, the watch can sometimes take accidental hits from furniture, parts of the interior of the car, and so on. Protective glass negates all risks of damage to the surface of the smart watch screen; it is not noticeable from the outside and does not interfere with touch.
We also recommend protective glasses with ultraviolet glue for smart watches Apple Watch 38, 40, 42, 44, 45 mm
In addition, instead of glass, we recommend purchasing silicone cases for smart watches Apple Watch, which can be worn, for example, during outdoor activities, when you are big risk of damaging them.
Before sticking the glass, you need to clean the screen.
For glasses with an adhesive base around the edges: remove the protective film from the back of the glass and, without pressing yet, place it on the watch screen. Press down on the middle to squeeze out the air, and then use your fingers to press the glass along the edges.
For glasses with an adhesive base over the entire area: remove the protective film from the back of the glass and, without pressing yet, place it on the watch screen. Then, with your finger or a plastic card wrapped in fabric, begin to expel the air from one edge to the other until the glass is completely free of bubbles.
